Max. length of rack 2000 mm
Milling travel / milling width cross max. 400 mm
Module, steel / cast iron 20m
Cutter , min./max 125 + 2 x cutting depth / 280 mm
Cutter width max. floating / with support 50 / 140 mm
Cutter mandrel max. 50 mm
Milling spindle head, swivelling right / left 30 / 45 Ø°
9 spindle speeds 22 - 136 rpm
Milling slide swivelling right / left 30
Feeds, infinitely variable (milling slide) 0 - 600 mm/min
Quick return 3,000 mm/min
Milling spindle drive 4 kW
Total electrical load 6 kW - 380 V - 50 Hz
Weight 4,500 mm
Accessories / Special Features
* Automatic milling cycle control via cam block with possibility of jump switching (= automatic by-pass of an area which should not be milled) and pendulum milling operation (= synchronized milling on the first half of table, and tool change on the second half.
* 2-parts hydraulic workpiece clamping device: 800 x 260 mm each (individually controlled by the pendulum milling operation).
* Heavy duty milling head with drive for milling speeds and flywheel.
* Manual fine adjustment of table (0.001 mm) for exact positioning in a pre-milled gear.
* Various change gears (approx. 10 pieces). * 2 cutter mandrels. * Various other accessories.
* Central lubrication. * Built-in hydraulic unit. * Coolant device with magnetic separator.
* Separate switch cabinet.
This machine is especially suitable for milling racks, and also for manufacturing
broaching tools (relief milling is possible by swivelling the cutter head). |