Used Gear Shaper Cutter SharpenerMico Collette A015 is specially designed for rapid accurate and automatic sharpening of spur and Helical gears.
Used Gear Shaper Cutter SharpenerMico Collette A015 is specially designed for rapid accurate and automatic sharpening of spur and ehlical gears. It is simple and quick operation to change the machine over from spur to helical gear cutter sharpening
For sharpening helical shaper cutters and spur shaper cutters-machine with fully automatic cycle and automatic wheel dressing.
GRINDING HEADS:-Internal M.T.4 Cutter adapter 1 1/4" dia. and 1 3/4" dia.,
Location internal M.T.4
NUMBER OF TABLE STROKES:-per minute 20-80
LENGTH OF TABLE STROKES:-infinitely variable from 5-115mm
WHEEL SPINDLE SPEEDS:-2500 and 3200 r.p.m.
Grinding wheel diam. for standard application 200mm
max. permissible 250mm
bore diameter 76.2 mm = 3"
Advance to grinding position by means of push-button
AUTOMATIC INFEED:-Infeed range 1.1mm
Diminishing feed 0-0,035mm
AUTOMATIC GRINDING WHEEL :-Dressing infeed compensation
Provisions for manual dressing with the aid of push-button
2 Dressing speeds for rough and finish grinding
Automatic switching over of the dressing speed
Dressing performed with table in loading positions
CENTRAL LUBRICATION:- automatic
LIGHTING :-40 W - 24 Volt
MOTOR RATINGS :-Wheel motor 1 KW 3000 r.p.m.
Hydraulic motor 0,75 KW 1500 r.p.m.
Coolant pump 0,1 KW 3000 r.p.m.
Motor for spur cutters 0,25 KW 1000 r.p.m.