Technical specifications of Koepfer Rack Milling

One  used KOEPFER Model 205 DOUBLE HEAD (DUPLEX) RACK CUTTING MACHINE,

      STRAIGHT SPUR and HELICAL,

      WORKTABLE:

      Length of clamping surface................. 670 mm  27

      Width of clamping surface.................. 135 mm  5

      Number of T-slots.......................... 3

      Width of T-slots........................... 12 mm

      TOOTH DATA:

      Max cutting length......................... 508 mm  20

      Max cutting width.......................... 100 mm  4

      Max pitch: In steel 60tons/square inch..... 6 D.P.

                 In cast iron.................... 5 D.P.

      CUTTER HEAD:

      Can swivel either right or left of centre.. 20

      Cutting speeds..............(6)............ 80 645 rpm

      RANGE of FEEDS:

      Plunge feed.................(9)............         5/8 min

      Lo1ngitudinal feed..........(9)............         1 min

      RAPID TRAVERSE:

      Plunge cut return..........................         25/64 sec

      Longitudinal cutter return.................         25/64 sec

      Worktable return...........................         1 sec

      MOTORS:

      2 main drive motors........................ 1.5 KW @ 1500 rpm

      2 for plunge motion of cutter head......... 0.55 KW @ 1500 rpm

      1 motor for rapid return of the feed....... 1.1 KW @ 3000 rpm

      1 motor for feed........................... 0.55 KW @ 1500 rpm

      1 motor for index mechanism................ 0.55 KW @ 1500 rpm

      1 coolant pump motor....................... 0.33 KW @ 2800 rpm

      APPROXIMATE WIGHT.......................... 2700 kg 5750 lbs

      Complete with:-

                    Automatic cycles.

                    Work holding fixture.

                    Change gears.

                    Automatic lubrication.

                    Coolant pump, tank & fittings.

                    Electrics