SPECIFICATIONS

3” spiral Bevel Gear Generator

CAPACITY

Longest cone distance, 5/8” face,
30° spiral angle..…………… 2¼”
Longest cone distance, 4/10”
Face, zerol…………………. 1-1/5”
Shortest cone distance………. 0
Maximum pitch angle, shafts at
90°……………………………………….75° 58’
Minimum pitch angle, shaft at
90°……………………………………………..14° 2’
Extreme ratio………………………………4 to 1
Minimum teeth in meter gears………..16
Maximum pitch diameter 4 to 1
Ratio gear …………………………………4 7/16”
Maximum pitch diameter 2 to 1
Ratio- gear………………………………………..4”
Maximum pitch diameter 1 to 1 ratio………………………………..3 3/16”
Largest Pitch (Diametral)………..10
Smallest pitch (Diametral)………..limited only by point width of cutter
Longest face………………………………5/8”
Range in number of teeth……………………………..8-80

WORK SPINDLE
Diameter of taper hole, large End…………………..1 1/16”
Taper per foot………………….1/2”
Depth of taper…………………………3”
Diameter of hole through……………………….5/8”
Range in distance from centre of machine to spindle nose….. 1 ¼” to 3 ¼”

SPEED AND FEEDS
Feet per minute………….75 to 250
Feed, time per tooth, in seconds 1½ to 30

DRIVE
H.P.of motors…………………………………..¾
Speed of motors……………………………….. 1500 or 1800

MISCELLANEOUS
Floor space…………………………………………….33” x 35”
Net weight…………………………….1800 lbs.
Gross Weight, Domestic shipment…………………………………2175 lbs.
Foreign Shipment -1 Box 56” x 43” x 59”………………………….2250 lbs.